data brief for further information contact your local stmicroelectronics sales office. september 2011 doc id 022250 rev 1 1/4 4 STEVAL-TLL013V1 5-channel (2 leds in series per channel) step-up white led driver demonstration board based on the stled25 features operating input voltage range from 2.3 v to 5.5 v 7.5% led current accuracy two leds in series per channel high-side current source up to 125 ma of total led current 86% efficiency at 100 ma pwm dimming with automatic shutdown time window 2.5 mhz switching frequency rohs compliant description the STEVAL-TLL013V1 demonstration board was designed to demonstrate the performance of the stled25, a fixed frequency, high-efficiency, boost dc-dc converter with five parallel high-side current sources. the stled25 is able to provide 125 ma of total current with a maximum voltage of 7.5 v on each channel. each current sour ce supports single or dual led connections. the output voltage of the step-up converter is automatically set at 100 mv above the highest voltage required on any driver to guarantee the proper operation of the linear current sources. the devi ce implements a self- test feature to detect any failure of the leds and to disable the related channel. the failure status is reset as soon the ic is disabled. this mode of fa ilure detection allows the device to continue operating driver channels that are operating normally, while avoiding excessive power consumption or associated thermal issues. STEVAL-TLL013V1 www.st.com
schematic circuit STEVAL-TLL013V1 2/4 doc id 022250 rev 1 1 schematic circuit figure 1. application schematic table 1. typical external components component manufacturer part number value size c in murata grm155r60j155m 1.5 f 0402 c out murata grm219r61a116u 10 f 0805 l samsung cig21k4r7sce 4.7 h 0805 r set 25 k (1) 1. for 20 ma per branch. 0402
STEVAL-TLL013V1 revision history doc id 022250 rev 1 3/4 2 revision history table 2. document revision history date revision changes 21-sep-2011 1 initial release.
STEVAL-TLL013V1 4/4 doc id 022250 rev 1 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
